Luxafor Switch technical specifications and requirements
What is Luxafor Switch?
Luxafor Switch is an electronic LED device that in comparison to Luxafor Flag and Luxafor Bluetooth does not use Luxafor Software to change the colors in order to notify the availability status of a user or spaces.
It is wireless, remote-controlled, and can be equally used for notifying about the availability status of individual people or the availability of spaces, like, workstations, conference, and meeting rooms.
Luxafor Switch has 4 pre-set color modes that cannot be modified or customized: Red, Green, Yellow, and Blue. The Switch Cube is the remote control of the device and the colors are being changed by putting the Cube sideways. For more information about how to use the Luxafor Switch please read Luxafor Switch setup and use.
With one Switch Cube, it is possible to control only one Dot at a time! Switch Cube cannot be used to control Luxafor Bluetooth or integrate with any software.
Technical parameters of the Luxafor Switch device:
Luxafor Switch Cube
- Dimensions: 52 x 52 x 27 mm (2.05 x 2.05 x 1.06")
- Weight: 50g
- Light: 6 x RGB LEDs
- Consumption: Rated power up to 40 mA
- Charging: With a standard micro USB data cable
- Built-in 1200mAh battery
- Working time: ~34 h (depends on the working mode)
Luxafor Dot with Luxafor Power Bank
- Dimensions: 124 x 24 x 23 mm (4.88 x 0.94 x 0.90")
- Weight: 76g
- Light: 2 x RGB LEDs
- Consumption: Rated power up to 80 mA
- Charging: With a standard micro USB data cable
- Built-in 2600 mAh battery
- Working time: ~50 h (depends on working mode)
- Dot: USB powered (Luxafor Power Bank)
Upon the purchase of the device you will receive:
- 1 x Luxafor Dot - the availability indicator
- 1 x Luxafor Power Bank - the power source for the Dot
- 1 x Luxafor Switch Cube - the remote control for the Luxafor Dot
- 1 x USB Charging Cable
- 1 x Magnet with double-sided tape